Alpha-beta titanium alloy Ti-6Al-4V with a high strength-to-weight ratio.
Material gradeTitanium Grades
/ 01 — TECHNICAL OVERVIEW
Titanium Grade 5 (Ti-6Al-4V / UNS R56400)
Nesco Pipe & Tubes is a manufacturer, stockist, supplier and exporter of Titanium Grade 5 (Ti-6Al-4V / UNS R56400), available in pipes, tubes, sheets, plates, round bars, forgings and other product forms, subject to applicable specifications, dimensions and availability.
Titanium Grade 5 provides a high strength-to-weight ratio, good corrosion resistance and reliable performance in demanding mechanical and industrial environments. Product cleanliness, surface condition and contamination control are important during fabrication.
Ti-6Al-4V is a widely used alpha-beta titanium alloy offering high strength and low density for aerospace, high-performance engineering, marine and demanding mechanical components.
The correct material depends on more than strength or corrosion resistance alone. Temperature, pressure, chemical environment, mechanical loading, fabrication route, weldability, heat treatment, product form, code requirements and lifecycle cost should be reviewed together. Final grade selection remains with the customer’s qualified engineer, designer or material specialist.
How it is made
01
Titanium sponge and alloying additions are vacuum melted under controlled conditions to achieve the required Ti-6Al-4V chemistry and control interstitial elements.
02
The resulting ingot is forged or rolled into billet, slab, bar or other starting feedstock according to the required product form.
03
Forging, rolling, extrusion, drawing or machining is used to produce the specified product form, dimensions and tolerances.
04
Heat treatment and controlled surface treatment are applied as specified for the required material condition and surface quality.
05
Surface condition, dimensions, material identity, mechanical properties, NDT and certification are verified against the applicable product specification before clean packing and dispatch.
Request reviewed quotation Material documents on request
/ 02 — PRODUCT DETAIL
Built around the specification.
Key characteristics and commonly referenced standards for Titanium Grade 5 (Ti-6Al-4V / UNS R56400).
Key features01 02 03 04
Available across multiple product forms subject to the applicable specification, dimensions and availability.
Heat-wise traceability and material test certificate (MTC) support.
PMI, NDT and third-party inspection options where specified.
Common specification references
STD
ASTM B265 — Titanium and titanium alloy plate, sheet and strip, where applicable
STD
ASTM B338 — Titanium and titanium alloy seamless and welded tubes for condensers and heat exchangers, where applicable
STD
ASTM B861 / B862 — Titanium and titanium alloy seamless / welded pipe, where applicable
STD
ASTM B348 — Titanium and titanium alloy bars and billets, where applicable
STD
ASTM B381 — Titanium and titanium alloy forgings, where applicable
STD
Project specification — Surface condition, cleanliness, NDT, inspection and supplementary requirements, where specified
/ 03 — MATERIAL RANGE
Grades matched to the service.
Commonly requested families are shown below. Availability is confirmed against the complete specification.
Material familyCommon gradesTypical selection context
Specified gradeTitanium Grade 5 — Ti-6Al-4V / UNS R56400
Supply reviewed by product form, governing standard, condition and service
Alloy familyAlpha-Beta Titanium Alloy
Related titanium grades are reviewed against the specified application and requirements and are not automatic substitutes
/ 04 — SUPPLY & CUSTOMISATION
Available forms and enquiry basis.
Pipes, tubes, flanges, butt weld fittings, sheets and plates, and round bars. Coil enquiries are rare and reviewed only against a complete specification.
ParameterTypical Options
01Available forms
Pipes, tubes, flanges, butt weld fittings, sheets, plates, round bars and other forms, subject to specification and availability
02Product standard
Applicable material and product standard for the selected pipe, tube, flat product, bar, flange or fitting form
03Supply condition
Annealed, heat treated, cold worked, hot worked, pickled, polished or as specified for the product form
04Dimensions
Product-form dimensions, tolerances, cut lengths and end or edge preparation, as applicable
05Testing
PMI, mechanical testing, corrosion testing, NDT or supplementary testing, as required by the applicable specification
06Documentation
Material test certificates (MTCs), inspection reports and other quality documentation, as specified or requested
07Enquiry basis
Grade / UNS, product form, applicable standard, dimensions, quantity and delivery destination
/ 05 — DIMENSIONS & SIZE RANGE
Dimensions aligned to the manufacturing route.
Dimensions must be specified for the selected product form; a grade designation alone does not define size, tolerance, surface condition or supply condition.
Product formOrdering dimensionsCondition / finishStandard basis
PipeNPS/OD, wall thickness or schedule, length and endsSeamless/welded, annealed, heat treated or finished as specifiedApplicable pipe material and dimensional standards
TubeOD, wall thickness, length or coil/U-bend geometrySeamless/welded, annealed and surface finish as specifiedApplicable tube/product standard
Flat productThickness, width, length or coil geometryHot/cold rolled, annealed, pickled or polished as specifiedApplicable flat-product material standard
Bar / forgingDiameter/profile, tolerance and cut lengthHot worked, forged, cold finished or machined as specifiedApplicable bar/forging material standard
/ 06 — MANUFACTURING STANDARDS
Standards aligned for every order.
The material standard, dimensional standard and project requirements should be stated separately.
Titanium Grade 5 (Ti-6Al-4V / UNS R56400) product-standard references
StandardWhat it covers
ASTM B265Titanium and titanium alloy plate, sheet and strip — Flat products
ASTM B338Titanium and titanium alloy seamless and welded tubes for condensers and heat exchangers — Tube
ASTM B861 / B862Titanium and titanium alloy seamless / welded pipe — Pipe
ASTM B348Titanium and titanium alloy bars and billets — Long products
ASTM B381Titanium and titanium alloy forgings — Forged products
Project specificationSurface condition, cleanliness, NDT, inspection and supplementary requirements — Order-specific
/ 07 — REFERENCE MATERIAL DATA
Titanium Grade 5 (Ti-6Al-4V / UNS R56400) material reference
A concise engineering identity for procurement. Exact chemical limits and mechanical acceptance values vary by product form, size, condition and applicable specification; the certified MTC governs the supplied material.
Chemistry and alloy identityPrincipal alloying profile; certification limits follow the ordered standard.
Material referenceTechnical profile
Grade / designationTitanium Grade 5 — Ti-6Al-4V / UNS R56400
Alloying systemAlpha-beta titanium alloy containing aluminium and vanadium as principal alloying elements
Certification basisHeat analysis and product requirements are certified against the exact material specification stated on the purchase order
Mechanical-property basisProduct-form and condition dependent; verify certified values against the applicable specification
Property basisProduct-form and condition dependent; verify certified values against the applicable specification.
Property basisSupply requirement
Mechanical profileStrength and ductility depend on product form, material condition, size and applicable product specification
Acceptance valuesUse the tensile strength, yield strength, elongation and hardness requirements specified for the ordered product form and condition
CertificationActual heat / lot results are reported on the agreed material test certificate
/ 08 — INSPECTION & TESTING
Evidence before dispatch.
01Grade / UNS and applicable product-standard verification
02Heat-number traceability and MTC review
03PMI against the specified Titanium Grade 5 chemistry
04Dimensions, tolerances and surface-condition inspection
05Mechanical and hardness testing as required by the applicable product specification
06Metallurgical, corrosion or other supplementary testing where specified
07NDT and third-party inspection / witnessing against the approved inspection plan
Testing requirements are applied according to the applicable material/product standard, purchase specification and approved inspection plan.
/ 09 — PACKAGING & MARKING
Protected and traceable.
01Product-form-specific protection for machined faces, surfaces and ends
02Heat-wise segregation and durable grade / heat identification
03Clean, non-contaminating separators and protective materials suitable for titanium products
04Moisture-resistant wrapping, crates or export packaging where required
05Package markings aligned with grade, heat number, dimensions, quantity and purchase order
Packaging and marking can be adapted to customer, project and export requirements.
/ 10 — APPLICATIONS & INDUSTRIES
Engineered for demanding service environments.
From process plants to marine systems, NESCO coordinates material, dimensions and documentation around the operating conditions of each application.
01
Chemical processing02
Oil and gas03
Power generation04
Marine systems05
Heat exchangers06
Industrial fabricationIndustries servedOne supply partner across critical sectors.
Chemical processingMarineHeat exchangersDesalinationAerospace supply chainMedical & high-performance engineering
/ 11 — WHY NESCO PIPE & TUBES
Built for buyers who cannot leave details to chance.
From specification review to export documentation, NESCO coordinates the technical and commercial details as one complete supply requirement.
01
Specification control
NESCO reviews the grade, product standard, dimensions, condition and acceptance criteria as one coordinated requirement.
02
Multi-material sourcing
Stainless steel, duplex, nickel alloy, copper-nickel and titanium requirements can be combined within one project enquiry.
03
Traceable documentation
Heat numbers, MTCs and agreed inspection records are aligned with the purchase order before dispatch.
04
Inspection coordination
PMI, dimensional checks, NDT and third-party witnessing can be arranged against an approved inspection plan.
05
Value-added processing
Cutting, machining, end preparation, polishing or protective finishing can be reviewed with the base material supply.
06
Export-ready packing
Identification, surface protection and packing are planned around product geometry and the final transport route.
07
Responsive RFQ review
Technical and commercial inputs are consolidated early so queries are resolved before quotation and production.
08
One accountable supply desk
NESCO provides a single contact for material, processing, documentation, packing and delivery coordination.
/ 12 — FREQUENTLY ASKED QUESTIONS
Clear answers before you specify.
Quick guidance on product selection, standards, dimensions, inspection and documentation. For project-specific requirements, NESCO will review the complete enquiry with your team.
01What product forms are available in Titanium Grade 5?
Availability can include pipes, tubes, flanges, fittings, sheets, plates, coils and bars, but each form must be confirmed against its own material standard and production range.
02What standard should be specified for Titanium Grade 5?
State both the exact grade/UNS and the product-form material standard. A plate specification cannot be assumed to cover pipe, tube, bar, flange or fitting supply.
03Can NESCO provide chemical and mechanical certificates?
Yes. An agreed material test certificate can report heat analysis and mechanical results required by the ordered specification.
04Can another grade be substituted?
Only with written approval from the responsible engineer after reviewing corrosion, strength, temperature, fabrication and code requirements.
05What information produces the fastest quotation?
Provide grade/UNS, product form, standard, size, condition, quantity, tests, certification and delivery destination.
/ 13 — REQUEST FOR QUOTATION Nesco direct sales desk
Ready to source?Start with the details you already have.
Our team will review the grade, dimensions, testing and delivery requirements together.